SS-1
Ranger Seismometer
 
 
 

The Kinemetrics SS-1 Ranger Seismometer, widely recognized as an excellent short-period field seismometer, is the terrestrial version of the "lunar seismometer" designed for the Ranger lunar program. The current SS-1 retains the original features of small size, high sensitivity, adjustable natural period and rugged watertight construction. An important feature of the Ranger is that it can be adapted as either a vertical or horizontal seismometer by simple adjustment of the mass centering spring.  The SS-1 is frequently used as a sensor for ambient vibration measurements of buildings, bridges, foundations and offshore platforms.

The SS-1 Ranger Seismometer has been used extensively for years as a field seismometer by major seismological observatories. As a structural dynamics instrument, the SS-1 Ranger pioneered in the determination of multi-modes of vibration under low-level excitation; structures studied under this application have included dams, high-rise buildings and nuclear power plants.

                        Click here for datasheet.

General Description
The SS-1 Ranger Seismometer is a "moving coil" style (velocity) transducer. The coil is stationary, however, while the strong permanent magnet serves as the seismic inertial mass. The mass is supported and constrained by annular springs at the top and bottom of the moving magnet.

The basic natural period of 0.35 seconds is extended to 1 second or more by means of small rod magnets which surround the periphery of the mass, interacting with its magnetic field. The separate calibration coil in the base provides a simple and accurate means of field-calibrating the SS-1, using only a known-voltage and a fixed precision resistor. In a vertical position, the unit is 5.5 inches in diameter and 12 inches high, including the inertial mass centering extension. For transportation, a protective clamp for the moving mass is incorporated into the base of the seismometer. Available as options for the SS-1 are adjustable leveling feet and bulls-eye levels.

Technical Specifications
Natural Period: 1 second nominal
Weight of Mass: 1.45 kg
Mass Travel: +/-1 mm
External Resistance for
70% of critical damping:
Approximately equal to coil resistance
Calibration Coil Resistance: 150 ohm
Calibration Coil Motor Constant: 0.4 newtons per ampere nominal
Transducer Coil  Options: Transducer Coil - 5000 ohms nominal
Approximate Generator Constant V/(m/s) - 345
Approximate CDR at 1 second -  6530
 
Physical Characteristics
Housing: Watertight case
Operating Temperature: -40° to 70° C (-40° to 160 F)
Size: 305 mm x 140 mm diameter (12" x 5.5")
Weight: 5.0 kg (10.9 Ibs)
 
Ordering Information
1. If desired natural period is greater than one second, specify for vertical or horizontal operation.
2. Specify desired transducer coil resistance, if other than 5000 ohms.
3. Specify options desired; bulls-eye levels and/or leveling feet.

  Back to Product Home